Thread rolling process for eyebolts

May 15, 2023

Lăsaţi un mesaj

Rolling thread will produce deformation strengthening layer and high residual compressive stress, which plays a great role in preventing the initiation and early expansion of fatigue cracks; at the same time, it will also reduce the surface roughness of the tooth valley, which is beneficial to the fatigue strength of bolts improvement. However, if the heat treatment is carried out after rolling the thread, the above-mentioned favorable factors will disappear. Therefore, from the perspective of improving the fatigue performance of bolts, the threads should be rolled after heat treatment. But there is another problem at this time, that is, the hardness of bolts, especially high-strength bolts, is usually higher after heat treatment, which reduces the life of the thread rolling die. In addition, if the quality of the rolling thread is not good enough, microcracks or spalling similar to contact fatigue will occur on the surface or root of the thread, the effect of improving the fatigue performance of the eyebolt is not obvious, and the fatigue performance will even be reduced.

Trimite anchetă